Richard Falk
Wed, 23 Jun 2010 15:17:50 -0700 (PDT)
2010
Thread size 9
I have a 97 S-10 lead acid battery. I was charging my batteries yesterday and was going to finish up with a leveling charge. It was just about done and I noticed a smell like burning plastic. It was leveling I shut it off and tried to pull the paddle out and it is stuck. I pul...
List member
Mon, 21 Jun 2010 00:41:43 EDT
2010
Thread size 4
Hello Michael By 50 or 60 percent SOC? I am assuming this is the 12:00 or 1:00 o'clock position on the dash? The only problem with the above is the BMS shows a false reading as someone here point out before on the list. The BMS was never intended to be able to give an accurate...
Michael Anzalone
Sun, 20 Jun 2010 22:29:08 -0400
2010
Thread size 4
Last June, I got my truck going after it had been out of commission for several (8?) months. The previous owner purchased a replacement set of NiMH batteries from Jeff less than a year before selling the truck to me. I'm not sure how many miles he drove with them before the tr...
List member
Sun, 20 Jun 2010 19:56:10 EDT
2010
Thread size 4
A few questions have come up about conditioning NiMH batteries from different drivers so this is not about any one person. Do not keep driving your NiMH pack when your batt life dash light comes on. At the most if you must go do so no more than one mile but at a far reduced ra...
List member
Sun, 20 Jun 2010 18:17:36 EDT
2010
Thread size 2
Hello Michael Seems like a good short time fix to me. Don From: Michael Anzalone <[email removed] (mailto:[email removed]) > Precedence: list MIME-Version: 1.0 To: [email removed] (mailto:[email removed]) Date: Sat, 19 Jun 2010 12:24:47 -0400 Message-ID: <[email removed] (mail...
Michael Anzalone
Sat, 19 Jun 2010 12:24:47 -0400
2010
Thread size 2
While we await the availability of replacement fan buffers for our S10s, I came up with what I believe is a decent *temporary* "workaround" for the fan buffer problem. I hooked up a relay which switches the fan on (at full speed) whenever the reversing valve is active. The rel...
Niel Nielsen
Wed, 16 Jun 2010 23:02:39 -0500
2010
Thread size 1
An HTML attachment was scrubbed... URL: <http://five.pairlist.net/mailman/private/s10-ev/attachments/20100616/76bc1f94/attachment.htm>
Michael Anzalone
Tue, 15 Jun 2010 09:11:51 -0400
2010
Thread size 1
Ok, it's not what you think, but yes, my truck is going to be in a commercial (or so I am told!) Here's the story: A manufacturer of paint-on bedliners was looking for a pickup truck to use as a "model" in the filming of a commercial. In exchange, the vehicle owner would recei...
Michael MacDonell
Wed, 9 Jun 2010 18:30:19 -0700 (PDT)
2010
Thread size 1
I have narrowed an AC issue down to a what I believe is a bad orifice tube but wanted to get some feedback from the list before I replace anything. The charging shut down before completion and set a code 026 during charging for "battery pack thermal performance". The manual do...
Michael MacDonell
Wed, 9 Jun 2010 18:00:22 -0700 (PDT)
2010
Thread size 1
-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://five.pairlist.net/mailman/private/s10-ev/attachments/20100609/cf94f68c/attachment.htm>
McMullin, Kevin
Mon, 7 Jun 2010 13:02:50 -0400
2010
Thread size 2
Follow the wire from the Fan motor up to it. It is an Epoxy filled circuit, about 2" X 3" and is mounted on a 1" box tubing frame around the controller. Kevin McMullin ________________________________ From: [email removed] [mailto:[email removed]] On Behalf Of Richard Falk Sen...
Richard Falk
Mon, 7 Jun 2010 09:28:03 -0700 (PDT)
2010
Thread size 2
Were is the fan buffer located? ? ??????????? Thanks Rick --- On Mon, 6/7/10, [email removed] <[email removed]> wrote: From: [email removed] <[email removed]> Subject: S10-EV Digest, Vol 85, Issue 3 To: [email removed] Date: Monday, June 7, 2010, 8:56 AM Send S10-EV mailing li...
Michael Anzalone
Mon, 7 Jun 2010 09:56:42 -0400
2010
Thread size 6
Does anyone have schematics or photos of Jeff's design? I would be willing to work on duplicating a quantity of buffers to meet the needs of the group (myself included!) Michael Anzalone =D~ On Mon, Jun 7, 2010 at 7:47 AM, McMullin, Kevin <[email removed]>wrote: > I had the Bu...
McMullin, Kevin
Mon, 7 Jun 2010 07:47:38 -0400
2010
Thread size 6
I had the Buffer/Fan issue and replaced it with one of Jeff's. I saved the old one. If anyone is making new ones, I have the connectors. Kevin McMullin ________________________________ From: [email removed] [mailto:[email removed]] On Behalf Of Michael Anzalone Sent: Sunday, J...
Michael Anzalone
Sun, 6 Jun 2010 14:33:36 -0400
2010
Thread size 6
Hi Don, Thanks for the response. My truck has the OEM Fan Buffer (probably not the original, as one of the mounting screws was missing). I do have a Tech2, and was unable to get the fan on when commanded. Using a 12VDC power supply, I connected directly to the fan so that I co...
List member
Sun, 6 Jun 2010 14:18:48 EDT
2010
Thread size 6
Hello Michael I receive the list in digest. I have not seen any replies so sorry if someone has already addressed this. You should check your fuse and I would bet money you need a new fan motor. If your lucky you already have Jeff/s better fan buffer. I believe the majority of...
Richard Falk
Sun, 6 Jun 2010 07:52:53 -0700 (PDT)
2010
Thread size 1
I know it may be a long shot but my air was not working also. Th vacume hose going to the round cannister mounted to the hood ,drivers side was bad. Replaced and it started to work. ? ???????????????????????????????????????? Thanks RIck --- On Sun, 6/6/10, [email removed] <[em...
Michael Anzalone
Sun, 6 Jun 2010 08:39:24 -0400
2010
Thread size 6
> > My 1998 native NiMH truck?s A/C has ceased to function. Having searched the archives, I learned that a faulty condenser fan buffer could cause this problem. Sure enough, my truck?s condenser fan does not come on when I turn on the A/C. I also cannot get the fan to come on...
Michael Anzalone
Fri, 28 May 2010 15:58:43 -0400
2010
Thread size 1
My Tech2 has intermittently reported the following DTCs which, while they are seemingly straigtforward in description, they do not appear to be documented in the service manuals. Or if they are documented, I haven't been able to locate anything about them: 232 Battery Pack Coo...
Marcos Peixoto
Thu, 27 May 2010 09:20:18 -0700 (PDT)
2010
Thread size 3
Scammers.? Targeting groups now...? Before they used to appeal to greed with the bounties of cash looking for an owner.? Now they have changed their tactics.? Mercy, compassion within an interest group.? With this, they are certainly getting smaller amounts but quite possible...
Robert Ogle
Thu, 27 May 2010 11:04:09 +0000
2010
Thread size 3
Hello, I'm sorry for this odd request and I'm writing this with tears in my eyes,I came down here to London,England for a short vacation and i was mugged at gun point last night at the park of the hotel where i lodged all cash,credit cards and cell were stolen off me. I am eve...
Kevin Kayden
Thu, 13 May 2010 18:59:10 -0400
2010
Thread size 4
Yes, I had heard about the forklift battery. They were supposed to be getting the forklifts here in the U.S. that used the FV-1260 battery, but for some unknown reason the company decided against bringing those forklifts to this market. Unfortunately, the FV-1260 battery, whil...
Kevin Kayden
Thu, 13 May 2010 14:17:20 -0400
2010
Thread size 4
There used to be a webpage from Matsushita about the EV-1260 battery, but apparently that has been removed. Wouldn't want people to know about this battery of course. Apparently it isn't made anymore even in Japan, but I'm not sure. The specifications I have are: Length: 15.28...
McMullin, Kevin
Thu, 13 May 2010 13:04:50 -0400
2010
Thread size 2
Is there a spec sheet on the Panasonic EV-1260 that we could compare to? Weight... I believe the Panasonics were 30.8 lbs each? Which make the original pack weight just over 800 lbs. My Dekas are 1430 lbs. My truck felt very heavy so I installed a 1000 lb "add-a-Leaf" spring k...
Kevin Kayden
Thu, 13 May 2010 11:10:08 -0400
2010
Thread size 2
I am hoping, after doing years of research on this, that I could add something to the battery discussion. I did find the EV-1260 battery still being produced, but it was in Japan and it was not economically feasible to get them here to the U.S. So that left us all with the pro...
McMullin, Kevin
Wed, 12 May 2010 14:50:24 -0400
2010
Thread size 4
Thanks Niel, I may have triggered that SOC reset last night. I started all of this with about 70% SOC with 75 AH Lead-Acids. I had my Tech 2 on and a friend driving up a slight, long hill to watch voltages while under load. I had #5 battery drop to 9.5 volts and the Bat Life l...
Niel Nielsen
Wed, 12 May 2010 12:08:21 -0500
2010
Thread size 4
An HTML attachment was scrubbed... URL: <http://five.pairlist.net/mailman/private/s10-ev/attachments/20100512/ac6d57c2/attachment.htm>
Rick Falk
Tue, 11 May 2010 10:01:56 -0500
2010
Thread size 1
My air was not working. I found the problem. If you have the hood up and are looking at the compartment. On the right side there is a round vacuum chamber attached to the hood. The vacuum line was bad going to that. I replaced it and my air started working right away. Easy che...
McMullin, Kevin
Mon, 10 May 2010 11:51:27 -0400
2010
Thread size 2
Check this for the noise... http://five.pairlist.net/mailman/private/s10-ev/2008/001387.html Kevin McMullin ________________________________ From: [email removed] [mailto:[email removed]] On Behalf Of Rick Falk Sent: Monday, May 10, 2010 10:15 AM To: [email removed] Subject: [...
Rick Falk
Mon, 10 May 2010 09:14:36 -0500
2010
Thread size 2
My truck when it is setting in the garage I hear a high pitch noise coming from it. Any ideas? Thanks Rick [email removed] -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://five.pairlist.net/mailman/private/s10-ev/attachments/20100510/4d0b...