Richard Falk
Mon, 26 Apr 2010 14:01:04 -0700 (PDT)
2010
Thread size 1
??? I just got my S-10 lead acid truck running this last Friday. I drove it for 7 miles. It started slowing down quite early in the drive at the end 25 miles per hour was it. I had hooked up my 220 volt charger on it. It says 0 % charge 1 hr and 50 min to charge. The fan comes...
McMullin, Kevin
Mon, 26 Apr 2010 14:22:19 -0400
2010
Thread size 2
Have you tried initiating a leveling charge with the Tech 2? It is an option. Kevin McMullin ________________________________ From: [email removed] [mailto:[email removed]] On Behalf Of Stephen Weitz Sent: Monday, April 26, 2010 2:04 PM To: S10 EV Archive Subject: [S10-EV] NiM...
McMullin, Kevin
Mon, 26 Apr 2010 14:21:20 -0400
2010
Thread size 6
I'll add that with the PbA pack, the CC won't work in cold weather because there is a thermal request to heat the pack below (about) 40 degrees. I'm using my CC every day right now in Delaware. I charge with the 220 charger at home, drive my 18 miles in to work then charge wit...
Greg Brewsaugh
Mon, 26 Apr 2010 09:18:18 -0700
2010
Thread size 6
If your S-10 is a NiMH version, the Convenience Charger (CC) won't work. This was the case with NiMH EV-1, and the S-10EV uses the same propulsion system. The active battery cooling using the HVAC pulls more current than the CC can provide while charging in warm environments....
Stephen Weitz
Mon, 26 Apr 2010 11:03:54 -0700
2010
Thread size 2
My truck does not finish a charge and I get an E2 error. The Tech 2 shows the auto disconnect again. There are a couple of batteries that are higher than the others. I think the delta is being exceeded. What is the appropriate method for trying to get the batteries to be the s...
List member
Mon, 26 Apr 2010 11:49:31 EDT
2010
Thread size 1
Hello Stephen If I recall correctly the history of the codes will roll off with one hundred cycles of the key. To clear current codes requires the Tech2. I see you have already done that. Don To: S10 EV Archive <[email removed] (mailto:[email removed]) > Date: Sun, 25 Apr 2010...
Michael Anzalone
Mon, 26 Apr 2010 10:11:26 -0400
2010
Thread size 3
Stephen, I have seen DTC #274 caused by varying battery voltages (i.e. an imbalanced pack). Also, I believe that cycling the ignition is just an alternate way of clearing certain DTCs without a scan tool. If you have the Tech2, there's no need (or advantage) to cycle the ignit...
Richard Falk
Mon, 26 Apr 2010 07:06:03 -0700 (PDT)
2010
Thread size 6
I just got my truck on the road 4-23-2010. I have one charger. I would like to get another one. I would like a convience charger also. ? I am also in need of a tech 2. Anyone no if We need to have the candi thing with the tech 2? ? ???????????????????????? Thanks Rick --------...
Stephen Weitz
Sun, 25 Apr 2010 22:29:28 -0700
2010
Thread size 3
My truck has error codes 274 = auto disconnect 70 = high voltage interlock I deleted the current codes using the tech tool but these two continue. The manual mentions cycling the ignition to clear the code. Can anyone explain the procedure? I need to get rid of these so I can...
Stephen Weitz
Sun, 25 Apr 2010 22:41:23 -0700
2010
Thread size 3
Cancel the alert! I tried turning the truck on again and the service now and wait lights were gone. So I plugged the charger in and I am getting a charge now! I suppose the "cycling the ignition" is what happened as mentioned in the manual. Can anybody confirm that? Stephen in...
McMullin, Kevin
Fri, 23 Apr 2010 12:11:43 -0400
2010
Thread size 2
You will probably have to go through a full charge cycle to settle the gauge. My 97 will loose it's "memory" if I simply unplug the high voltage disconnect and accessory battery. After a full charge it goes back to normal. Kevin McMullin ________________________________ From:...
McMullin, Kevin
Thu, 22 Apr 2010 10:22:22 -0400
2010
Thread size 1
New Deka Unigy 12AVR75 (75 AH), batteries 10/09. Everything works, new Fuel Fired Heater, New Tiger Paw LRR tires. The bed tilts and the battery box has been modified to fit all 26 batteries and allow access to the batteries without dropping the box. Zener Diode Regulators on...
McMullin, Kevin
Fri, 16 Apr 2010 11:40:50 -0400
2010
Thread size 2
Thanks Don, I'm aware of this and like I said, I charge at work after my 18 mile drive in, with my convenience charger. Also, I have been given permission to install a 220V charger, here at work, so I'll be able to charge all year. Kevin McMullin ______________________________...
List member
Thu, 15 Apr 2010 20:43:37 EDT
2010
Thread size 2
Hello Kevin For long battery life it is best not to deep discharge lead acid batteries more than 50% DOD. Don From: "McMullin, Kevin " <[email removed] (mailto:[email removed]) > Precedence: list MIME-Version: 1.0 To: <[email removed] (mailto:[email removed]) > Date: Wed, 14 A...
McMullin, Kevin
Wed, 14 Apr 2010 08:07:26 -0400
2010
Thread size 1
I'm becoming more impressed with my range as the weather warms up and my pack is breaking in. My truck, with 75 AH lead acid batteries, got back on the road in October, last year, so I have never had any experience driving in the summer. The SOC meter is a little difficult to...
Paul Peavyhouse
Mon, 12 Apr 2010 08:32:05 -0700
2010
Thread size 4
Anyone have any comments on the tiny gauge of these wires? Are they sturdy enough, or should they the shrinkwrapped? Pv On 4/11/10, Niel Nielsen <[email removed]> wrote: > Jeff, > > Thanks for the info.? Useful stuff for everyone.? It's always great to hear > from the master....
McMullin, Kevin
Mon, 12 Apr 2010 06:58:54 -0400
2010
Thread size 5
Michael, Maybe the Reversing valve? With the Tech 2, you can command the reversing valve to change position. My 1997 sat for a long time, (had only 5800 miles on it when I bought it last year). I could not get the A/C to function and I believe the reversing valve was hung up....
Gil Dawson
Sun, 11 Apr 2010 18:52:46 -0700
2010
Thread size 5
Michael-- Is the "Heat" switch on? It's to the left of the steering wheel, under the headlight switch. It tells the heat transfer system to function as a heater. --Gil On Apr 10, 2010, at 8:25 P, Michael MacDonell wrote: > What could cause the A/C not to function on 2 differen...
Michael MacDonell
Sun, 11 Apr 2010 11:21:19 -0700 (PDT)
2010
Thread size 5
I got the cab AC going on one of the trucks but I'm not sure what I did to make it so, it just starting running. On the other truck I can perform the battery packing cooling test using the Tech 2 and it blows cold air through the pack ducting and I can see the action on the Te...
Michael MacDonell
Sat, 10 Apr 2010 20:25:54 -0700 (PDT)
2010
Thread size 5
What could cause the A/C not to function on 2 different 1997 Nimh trucks? I can get the heat pump to produce heat but get nothing when trying for cooling. I have monitored the process with a tech 2 and it does show that I am calling for A/C. I waited about 10 minutes but never...
Richard Falk
Fri, 9 Apr 2010 07:44:44 -0700 (PDT)
2010
Thread size 1
To Group, ? I used 26 of the NSB 60 FT. THey are 60 amp hour. I was able to put 20 of them in the bottom of the box sitting normal. Then I put the original battery divider on the of that set. I am laying remaining? 6 batteries on there side. I had to do some modification of th...
Kevin Kayden
Thu, 8 Apr 2010 11:27:43 -0400
2010
Thread size 4
It may be a bit off subject, but I was wondering what North Star battery was used where 26 of them would fit into the original battery box. Kevin Kayden -------------------------------------------------- From: <[email removed]> Sent: Thursday, April 08, 2010 10:00 AM To: <[ema...
Gil Dawson
Wed, 7 Apr 2010 17:16:13 -0700
2010
Thread size 4
I think that that shunt is a calibrated resistor. By measuring the voltage (in millivolts, I expect) across it, the computer measures the current flowing through all 26 batteries. So, in theory, it could go anywhere in the series circuit. Same with the fuse, I imagine. --Gil O...
Ryan Dela
Wed, 7 Apr 2010 13:30:42 -0700
2010
Thread size 4
That is correct. Ryan Dela Principal Engineer Great Northern Energy Systems, LLC (541)720-4559 - cell (541)523-4653 - office PO BOX 349 Baker City, OR 97814 On Apr 7, 2010, at 12:41 PM, Richard Falk <[email removed]> wrote: > I have a 97 lead acid S-10 that I am finishing up i...
McMullin, Kevin
Wed, 7 Apr 2010 06:51:20 -0400
2010
Thread size 4
I do not think the sensor has to touch the battery. (Mine don't). I believe it would be more important to install all of the sensors in the same way so they pick up the readings the same way. Kevin McMullin ________________________________ From: [email removed] [mailto:[email...
List member
Sat, 3 Apr 2010 17:07:06 EDT
2010
Thread size 1
The chargers on eBay are the Gen 1 chargers. They are not as durable or as light weight as the Gen 2 LP chargers. Don _http://cgi.ebay.com/Electric-Vehicle-Magne-Charge-EV-Paddle-Battery-Charger _W0QQitemZ200448776115QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item2eabad9 7b3_...
Phil Morgan
Fri, 02 Apr 2010 20:40:38 -0400
2010
Thread size 2
Looks good ... I put in an offer. Thanks, Kevin, for the "heads up." - - Phil Morgan On 2:59 PM, McMullin, Kevin wrote: > Just passing this along. May be worth an offer? > http://cgi.ebay.com/Electric-Vehicle-Magne-Charge-EV-Paddle-Battery-Charger_W0QQitemZ200448776115QQcmdZVi...
McMullin, Kevin
Thu, 1 Apr 2010 10:29:43 -0400
2010
Thread size 7
Sold 3/30/10. Buy it now price of $5,995.00 Kevin McMullin ________________________________ From: [email removed] [mailto:[email removed]] On Behalf Of Ryan Dela Sent: Tuesday, March 30, 2010 3:18 PM To: Ian Ward Cc: S10 EV Archive Subject: Re: [S10-EV] Hacked '97 S10 on eBay?...
McMullin, Kevin
Wed, 31 Mar 2010 14:27:00 -0400
2010
Thread size 2
Just passing this along. May be worth an offer? http://cgi.ebay.com/Electric-Vehicle-Magne-Charge-EV-Paddle-Battery-Char ger_W0QQitemZ200448776115QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item 2eabad97b3 Kevin McMullin -------------- next part -------------- An HTML attachmen...
Upgeya Pew
Tue, 30 Mar 2010 14:15:32 -0700
2010
Thread size 1
Hi, everybody. My 1998 S10E has stopped accepting a charge (the charger reports E2), and will not move on its own power. Instruments all light up, and report "service now" and "battery life". I'm not sure why, but I was recently sick for 2 weeks while the truck sat idle, so my...