List member
Thu, 3 Mar 2011 13:42:23 EST
2011
Thread size 9
Hello Isaac Sad to hear what happened. What a waste. I was hoping someone would post they had your parts. I don't believe there are any spare parts or salvage trucks around. There was one complete box sold a couple of years ago. The box went for a little over a thousand dollar...
Isaac Podolefsky
Thu, 3 Mar 2011 08:08:59 -0600
2011
Thread size 9
Hi Kevin, Well, since neither Noah or I have seen the truck yet this is what the public works director told me, "everything." Apparently their yard get's raided once in a while by people stripping copper. They must have opened the box, seen the wires in side and stole it for t...
McMullin, Kevin
Thu, 3 Mar 2011 08:14:17 -0500
2011
Thread size 9
Isaac, When you say "everything" are you speaking literally? I don't have any spares to help you out, but for someone to help, they would need to know. If you're not sure what is missing, I have some diagrams and pictures that may help. Kevin McMullin -----Original Message----...
Isaac Podolefsky
Wed, 2 Mar 2011 17:42:30 -0600
2011
Thread size 9
So many of you have come to know Noah and I, and our battle with our 97 S10 EV. ?Long story short, we've been battling back and forth with the military to get title, the truck was taken from us and given by the military to a public works department. ?After they realized what t...
Isaac Podolefsky
Mon, 28 Feb 2011 13:07:47 -0600
2011
Thread size 9
So many of you have come to know Noah and I, and our battle with our 97 S10 EV. Long story short, we've been battling back and forth with the military to get title, the truck was taken from us and given by the military to a public works department. After they realized what the...
List member
Wed, 23 Feb 2011 02:13:51 EST
2011
Thread size 2
You could try the dealer but I would be surprised if GM still sold them. I have no idea what the part numbers are. If no one has them on this list I doubt your going to find them. You might have to make your own. I do have a complete S-10 I could part out but I have been holdi...
Lee Underkofler
Tue, 22 Feb 2011 18:57:12 -0800 (PST)
2011
Thread size 2
I need the 3 Vibration Isolators that are used to mount the S-10EV Motor and Reduction Drive Pod. Does anyone know of the Part Numbers or source for these parts? Thank you, Lee -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://five.pairlis...
List member
Tue, 22 Feb 2011 19:34:09 EST
2011
Thread size 2
Your going to need a Tech2 scan tool as an example see eBay item 330398896721. You might be able to find a used one on eBay or Craigslist. As noted in the auction 330398896721 look out for non USA made units. There is a chance someone with a Tech2 might be close to you. Being...
RICHARD MUSGRAVE
Tue, 22 Feb 2011 17:27:45 -0600
2011
Thread size 2
Just purchased 97 S-10EV off Warner-Robins AFB, 9000 mi, all serv rec show 2008 last operation, can't get chrgr to say nothing but ( Connect to vehicle) , new aux batt, raised the bed , looks OK, no damage, probably Pb acid batt, , except some stamp on side of box Delco Batt P...
List member
Sun, 20 Feb 2011 18:56:45 EST
2011
Thread size 3
Hello Scott A fellow S-10 driver in Oregon just had some of the same codes. It turned out their APCM the Accessory Power Control Module had failed. I talked to Jeff and a quick check is to run your heat pump. There is two levels of failure. One type is that your heat pump stil...
List member
Fri, 11 Feb 2011 13:56:39 EST
2011
Thread size 12
Hello Matt This is not where you should be advertising your conversion EV for sale. This list is for the OEM 100% factory made 1997 and 1998 S-10 EV. Your more then welcome to post anything pertaining to the list but this is way off topic. Best of luck selling your EV. Don In...
Matt Kenigson
Fri, 11 Feb 2011 03:08:16 -0600
2011
Thread size 12
Hi all, I don't know if you ended up buying that vehicle but since the auction is over now I feel comfortable telling you about mine. I'm selling my 1987 Nissan Hardbody Shortbed, named "Quicksilver". It's a pretty standard conversion with a Curtis 400A controller, a Sevcon DC...
Gil Dawson
Thu, 10 Feb 2011 11:57:09 -0800
2011
Thread size 12
Uh-oh. My bad. I just looked it up in my records. $1200 in July '07. Sorry. Thanks for catching that, Isaac. --Gil On Feb 10, 2011, at 10:53 AM, Isaac Podolefsky wrote: > You paid $4k for a power steering module?!?! > > On Thu, Feb 10, 2011 at 12:28 PM, Gil Dawson <[email remo...
Gil Dawson
Thu, 10 Feb 2011 10:28:11 -0800
2011
Thread size 12
Hi, Jay-- On Feb 3, 2011, at 5:44 AM, Jay Summet wrote: It is also missing the power steering pump control module, so I'd either > need to find out to swap in, or wire up a switch or pushbutton. (or turn > really hard!) Turning really hard is not a bad thing. You won't hurt th...
Dewitt Coley
Sun, 6 Feb 2011 15:52:21 -0500
2011
Thread size 12
An Idea concerning the Power steering module on the S10-EV; it would be less expensive to convert it to manual steering by changing the steering gear box; less required electrical energy from the system; I did this to a 1984 S-15 Jimmy and do not regret the [email removed] MAY...
List member
Sun, 6 Feb 2011 15:13:14 EST
2011
Thread size 12
When I was tracking the Tech2 on eBay they seem to sell for around 1500 to 2000 dollars used. 1100 dollars is a very good buy you did well. There are now fake Tech2 units coming out of China so that is something to be concerned about. The shipping cost would depend on how far...
List member
Sun, 6 Feb 2011 14:58:27 EST
2011
Thread size 12
Hello Jay You might start out only wanting to make 3 mile trips. Then your going to find you enjoy driving electric so much you will soon want go farther. Myself I can make do with about 20 to 25 miles of range. Its nice to have around 50 miles of range but rarely used. NiMH m...
Michael MacDonell
Fri, 4 Feb 2011 16:22:38 -0800 (PST)
2011
Thread size 12
I was able to get by with a little less. Tech 2 scanner used from ebay was $1100.00, I? charged the batteries individually using 2 chargers that were $100 or so for the 2. I have dropped the pack several times on the garage floor using substantial jack stands and a heavy duty...
paul doe
Thu, 3 Feb 2011 22:03:45 -0800 (PST)
2011
Thread size 12
Jay, ? ??? You need a few items for this project...a tech 2 scanner (aprox. $3,000). a fairly substantial regulated dc power supply (aprox. $750), a set of good batteries (the shipping is almost as much as the batteries if you can find good ones), some way to get about 36 inch...
lhorsley
Thu, 3 Feb 2011 15:01:18 -0500
2011
Thread size 1
Hello Jay, I am in Douglasville, Ga. and I have a 1995 S-10 I have converted to a 120v. lead acid truck. The S-10 will run but the US145 6v. lead acid are in bad shape. I have driven the S-10 over 11k before the range was down to about 10miles. I have a 1999 Ranger EV I am now...
McMullin, Kevin
Thu, 3 Feb 2011 13:39:09 -0500
2011
Thread size 12
Hi Jay, Welcome. I can't answer all of your questions. Even though I've owned my 97 Lead-Acid truck for 2 years this May, I am still learning about these amazing trucks. You can get all of your questions answered in the archives of this site. Lots of good information and advic...
Jay Summet
Thu, 03 Feb 2011 08:44:57 -0500
2011
Thread size 12
Hello all, I just subscribed to this list yesterday because I found the S-10 EV that Michael is selling on E-bay. (He mentioned the list, so I assume he's also a subscriber.) I live in Atlanta (85mi south of Eljay) and am looking for a EV to make short (3mi round trips) commut...
Ryan Dela
Wed, 2 Feb 2011 17:19:13 -0800
2011
Thread size 12
http://cgi.ebay.com/ebaymotors/Chevrolet-S-10-Electric-1997-Chevrolet-S-10E-GM-Factory-Electric-Truck-NiMH-Bat-_W0QQcmdZViewItemQQhashZitem3364b802ffQQitemZ220733113087QQptZUSQ5fCarsQ5fTrucks#ht_1044wt_973 Looks like someone is selling one of the California NiMh conversions th...
List member
Sat, 29 Jan 2011 02:10:40 EST
2011
Thread size 1
Hello Niel I considered the defrosting of the condenser coil as well. However it does this every time you turn off the vehicle. Maybe I missed it but I have never notice the truck doing a defrosting of the coils while your using the heat pump. Its only when you turn it off or...
Gil Dawson
Thu, 27 Jan 2011 08:08:36 -0800
2011
Thread size 10
Hi, Ryan-- Getting that condenser coil fan spinning was a chore for me. Below are some things I learned. --Gil A shop fan set blowing into the grill worked well enough to charge the truck while I was awaiting diagnosis or parts. I could still drive the truck and set it up with...
McMullin, Kevin
Thu, 27 Jan 2011 09:11:32 -0500
2011
Thread size 10
There is a lot to learn about these trucks. I knew that the computer would initiate a "Thermal Request" to heat or cool the battery pack, but I didn't know it also dehumidifies. I can not drive my truck to work if the Ambient temp is below 40 degrees because the convenience, (...
List member
Thu, 27 Jan 2011 02:37:57 EST
2011
Thread size 10
Pulling the HV disconnect will not remove all the load off the pack. In the tray itself there are loads you have no way of removing unless you drop the pack and open it up and manually disconnect them. You should be good for a week no problem. Ten to 14 days is pushing it abou...
List member
Thu, 27 Jan 2011 00:59:31 EST
2011
Thread size 10
Hello Ryan I am use to seeing this every winter. I believe what your describing is the heat pump being used to dehumidify the battery tray. Was the temperature about 45 degrees or less? You will not see this happen in warm climates. The fan does not run while its performing th...
Ryan Dela
Wed, 26 Jan 2011 20:59:44 -0800
2011
Thread size 10
All, On a very wet and humid day recently I discovered steam coming out of the front of my grill from the heat pump coil and discovered that the cooling fan wasn't spinning... I have an OEM fan buffer (I think, at least it looks OEM) and the original fan. The buffer doesn't lo...
John Miller
Wed, 26 Jan 2011 16:44:45 -0700
2011
Thread size 10
What about pulling the HV disconnect? It won't prevent the self discharge but it will turn off the parasitic losses. From: [email removed] [mailto:[email removed]] On Behalf Of paul doe Sent: Saturday, January 01, 2011 5:06 PM To: S10 EV Archive; Stephen Weitz Subject: Re: [S1...